Models

Model 1612PS will operate most pump combinations whose continuous current draw does not exceed 16A

Model 812PS will most pump combinations whose continuous current draw does not exceed 11A

Two Pump Sentry Models to Choose From

Electrical Specifications	Model 1612PS	Model 812PS
Normal Mode Operation:
Input Voltage:	100-128 VAC	100-128 VAC
Input/Output Current (max.)	16A continuous	11A continuous
On Motor Start Up	22A peak	15A peak
Maximum Battery Charging Current	12A	12A
Maximum Recharge Time	13 Hrs.	13 Hrs.
Backup Mode Operation: (for recharging 180 minute reserve battery that has been depleted to 10.5 Volts DC)
Maximum Back Up Power	1600 Watts Cont.	1200 Watts Cont.
Maximum Back Up Power	180 A Cont.	120 A Cont.
Size: (inches)	3H x 6W x 21L	3H x 6W x 17L

Works with Hydromatic (SD 25A), Jacuzzi (3SPP), Stevens (22A Peak), Zoeller (12A), Tecumseh (13 Hrs). Also works with ALL column type pumps.

AC Pump Sentry VS 12 Volt DC Pump System

Pump Sentry	vs.	12 VDC Pump
Works with commonly available sump pumping equipment that may be already installed		It is usually an add on to the pumping equipment already in the sump pit
Can be used with a variety of pumps with varying pumping capacities		Available only in 1100 gal/hour at 10 feet capacity
Takes no extra room in the sump pit		Occupies space in the sump pit
Motor in pump. Has long life and is inexpensive to replace		Motor has shorter life than conventional AC motors used in common sump pumps
Pump is inexpensive to replace		Pump is expensive to replace